Subaru Legacy BN/BS (2015-2019) Service Manual: Rear differential mount bushing

Procedure

CAUTION:Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.1. Shift the select lever to “P” range.2. Apply the electronic par ...

Replacement

CAUTION:• If there was so much rust in the rear differential mount bushing, remove the rust before starting work.• Apply the molybdenum grease on the square thread of the ST (shaft and nut ...

Other materials:

Inspection
1. Remove the bulkhead harness connector from TCM. Transmission Control Module (TCM) > REMOVAL2. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD3. Set the probe of oscilloscope to the check board connector.Terminals:No. 13 (+) — No. 26 (−)(A)+ probe(B)− pro ...