Subaru Legacy BN/BS (2015-2019) Owners Manual: Rear seat heater (if equipped)

Subaru Legacy BN/BS (2015-2019) Owners Manual / Seat, seatbelt and SRS airbags / Seat heater (if equipped) / Rear seat heater (if equipped)

Rear seat heater (if equipped)

Rear seat heater switch

HIGH mode indicator
LOW mode indicator
Driver's side
Front passenger's side

Press the rear seat heater switch. Each time you press the switch, the mode will change as follows.

Rear seat heater (if equipped)

When LOW mode is selected, the LOW mode indicator on the rear seat heater switch illuminates. When HIGH mode is selected, both the LOW and HIGH mode indicators illuminate. When the OFF mode is selected, all the indicators turn off.

Selecting "HIGH" mode will cause the seat to heat up quicker.

NOTE Only the front seat heater switches retain the previous switch position even if the vehicle has restarted. The rear seat switch will reset.

Front seat heater (if equipped)

Front seat heater switch HIGH mode indicator MID mode indicator LOW mode indicator Driver's side Front passenger's side Press the front seat heater swi ...

Rear seats

WARNING Seatbelts provide maximum restraint when the occupant sits well back and upright in the seat. Do not put cushions or any other materials between occupants and seatbacks ...

Other materials:

Dtc p2750 intermediate shaft speed sensor "c" circuit range/performance
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Shifting shock is felt.• Acceleration is poor during standing start.• Shift control malfunction1. ENGINE TYPE FBSTEPCHECKYESNO1.CHECK DTC.Read the DTC using Subaru Select Monitor.Besides DTC P2750, is any of ...