Subaru Legacy BN/BS (2015-2019) Owners Manual: Front seat heater (if equipped)
Front seat heater switch
Press the front seat heater switch. Each time you press the switch, the mode will change as follows.
When LOW mode is selected, the LOW mode indicator on the front seat heater switch illuminates. When MID mode is selected, both the LOW and MID mode indicators illuminate. When HIGH mode is selected, all 3 LOW, MID and HIGH mode indicators illuminate. When the OFF mode is selected, all the indicators turn off. Selecting "HIGH" mode will cause the seat to heat up quicker. |
Seat heater (if equipped)
The seat heater operates when the ignition
switch is in the "ON" position.
CAUTION
People with delicate skin may
suffer slight burns even at low
temperatures if they use the ...
Rear seat heater (if equipped)
Rear seat heater switch
HIGH mode indicator
LOW mode indicator
Driver's side
Front passenger's side
Press the rear seat heater switch. Each
time you press the ...
Other materials:
Arming the system
NOTE
The system can be armed even if the
engine hood, the windows and/or
moonroof are open. Always make sure
that they are fully closed before arming
the system.
When arming the system, if any of
the doors or the rear gate/trunk lid is
not fully closed, an electronic ch ...
