Subaru Legacy BN/BS (2015-2019) Owners Manual: Receiving a call

Subaru Legacy BN/BS (2015-2019) Owners Manual / Audio / Hands-free phone system / Receiving a call

Incoming calls

When a call is received, the incoming call screen is displayed with a sound.

When you receive a phone call while the cell phone is connected, the screen changes to the incoming call screen.

Incoming call screen

No.	Function
1	Open the "Options" screen. Refer to "Phone volume settings"
2	Put the incoming call on hold. This function may not work on some cell phone models. This function is the same as pressing the on hook switch on the steering wheel for a short period of time.
3	Open the call screen. This function is the same as pressing the off hook switch on the steering wheel
4	Reject the incoming call. This function is the same as pressing and holding the on hook switch on the steering wheel.

NOTE

During international phone calls, the other party's name or number may not be displayed correctly depending on the type of cell phone you have.
The ringtone that has been set in the phone setting screen sounds when there is an incoming call. Depending on the type of Bluetooth phone, both the system and Bluetooth phone may sound simultaneously when there is an incoming call. Refer to "Phone volume settings" .

By off/on hook switch

When you receive a call, you can also answer it by pressing the off hook switch on the steering switch. To end a call, press the on hook switch.

Outgoing screen

Outgoing call screen No. Function 1 Open the "Options" screen. Refer to "Phone volume settings" . 2 Abort the call. The screen returns to the phone ...

Talking on the phone

The call screen opens when you perform the following operations. When you accept a call on the incoming call screen (by selecting the key), the call screen opens. When you a ...

Other materials:

To decrease the speed (by brake pedal)
Depress the brake pedal to release cruise control temporarily. When the speed decreases to the desired speed, press the "RES/SET" switch to the "SET" side once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pe ...