1. Remove the transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL 2. Attach the ST on the flywheel.
3. Remove the clutch cover and clutch disc. NOTE: • Take care not to allow oil to touch the clutch disc face. • Do not disassemble the clutch cover or clutch disc. |
InspectionDtc p0107 manifold absolute pressure/barometric pressure sensor circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON ST ...