Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

X mode switch

...

Inspection

1. CHECK SWITCH UNITMeasure the resistance between harness connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON ( ...

Other materials:

Adjustment
1. Install the transfer clutch assembly to the extension case with the transfer driven gear shims and thrust bearings removed.2. Install the thrust bearing.NOTE:Make sure to install in the right direction.3. Using the ST, measure the height “A” from the ST end face to the thrust bearing ...