1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the center grille assembly. Air Vent Grille > REMOVAL 3. Remove the heater control assembly. Control Panel > REMOVAL 4. Remove the audio assembly or navigation assembly. Audio > REMOVAL |
Center console
InstallationProcedure
1. PREPARATION FOR LEARNING1. Warm up or cool down until the ATF temperature displayed on the Subaru Select Monitor is 40 — 65°C (104 — 149°F).2. After stopping the vehicle, shift the select lever to “P” range.3. Apply the electronic parking brake.4. Lift up the vehicle ...