Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Evaporator sensor / Removal

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE

2. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE

3. Remove the evaporator assembly - cooling. Evaporator > REMOVAL

4. Remove the evaporator sensor.

Inspection

1. Prepare the vehicle.NOTE:Check that the ambient temperature is 25 — 40°C (77 — 104°F) and that the humidity is 30% — 80%.• Place the vehicle in the workshop or in the shad ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Disconnect the connector (A) of the front oxygen (A/F) sensor.4. Remove the clip (B) securing the front oxygen (A/F) sensor harness. (LH side only)5. Apply spray-type lubricant (004301003) or equivalent to the thre ...