Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL 2. Remove the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > REMOVAL 3. Remove the transmission case. Transmission Case > REMOVAL 4. Remove the drive pinion shaft assembly. NOTE: Use a hammer handle, etc. to remove if too tight.
5. Remove the main shaft assembly. |
Adjustment
1. THRUST BEARING PRELOAD1. Select a suitable adjusting washer No. 1 so that dimension (H) will be zero in a visual check. Position the washer (20 - 31 - 4) and lock washer (20 - 31 - 2.3) and attach ...
Other materials:
Tire pressure warning light does not come on
DETECTING CONDITION:Defective combination meterTROUBLE SYMPTOM:When the ignition switch is turned to ON, the tire pressure warning light does not turn on (for approx. 2 seconds).STEPCHECKYESNO1.CHECK DTC.Read the DTC of tire pressure monitoring. Read Diagnostic Trouble Code (DTC)Is DTC displayed-Pe ...
