Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h6do) / Front catalytic converter / Removal

The front and rear catalytic converters are integrated into the front exhaust pipe; therefore, refer to “Front Exhaust Pipe” for the removal procedure. Front Exhaust Pipe > REMOVAL

Inspection

1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting. ...

Other materials:

Installation
1. Press in a new pilot bearing to the position where it is flush with the flywheel surface or up to 0.4 mm (0.016 in) deeper than that.CAUTION:Do not press the bearing inner ring.(A)Pilot bearing2. Temporarily tighten the crankshaft position sensor plate and flywheel.NOTE:Align the knock pin hole o ...