Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the roof spoiler. Roof Spoiler > REMOVAL 3. Remove the trim panel - rear gate and the motor assembly - rear wiper. Rear Wiper Motor > REMOVAL 4. Disconnect the rear defogger connector. 5. Remove the touch sensor LWR. (Model with power rear gate) Power Rear Gate Touch Sensor > REMOVAL 6. Remove the glass - rear gate in the same procedure as for the glass - front window. Windshield Glass > REMOVAL |
Rear gate glass
...
Installation
NOTE:Use the markings on the glass to apply adhesive and primer, and to install the dam rubber - rear gate and the spacer - rear gate.(a)Locating pin - rear gate(d)Marking for dam rubber - rear gate a ...
Other materials:
Dtc b1643 side satellite sensor bus rh initialization error
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side sensor RH bus line communication initialization error (open/short circuit or connector connection failure between airbag CM and side airbag sensor RH, open/short circuit or connector connection failure between si ...
