Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Disconnect the rear defogger connector. 3. Remove the glass - rear window in the same procedure as for the glass - front window. Windshield Glass > REMOVAL |
Installation
1. Fabricate the cartridge nozzle tip as shown and set the sealant gun with the adhesive.(a)10 mm (0.39 in)(b)8 mm (0.31 in)(c)Sealant gun2. Smoothen and clean the adhesive surfaces of the glass - rea ...
Other materials:
Inspection
1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Measure the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch the sensor end in order to avoid misjudgment due to body temperature.Preparation tool:Circuit teste ...
© 2017-2026 Copyright www.sulegacy.com
