Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h6do) / Muffler / Removal

CAUTION:

Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

1. Lift up the vehicle.

2. Remove the bolts and self-locking nuts which secure the rear exhaust pipe to the muffler.

3. Apply a coat of spray type lubricant to the mating area of cushion rubber.

4. Remove the muffler from the cushion rubber.

CAUTION:

Be careful not to drop the muffler during removal.

5. Remove the cushion rubber and rear exhaust cover from the vehicle.

Inspection

1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting.3. Check the cushion rubber for wear or crack. ...

Other materials:

Dtc b16b2 short in side satellite sensor bus rh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Shorted between side sensor RH circuit and GND circuitWIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Airbag system Airbag System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK POOR CONTAC ...