Subaru Legacy BN/BS (2015-2019) Service Manual: Specification
1. CONDITIONS FOR COMPLETION OF ABS SEQUENCE CONTROL When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal control mode. • When the speed of at least one wheel reaches 10 km/h (6.2 MPH). • When the brake pedal is released during ABS sequence control and the switch - stop light becomes OFF. • After completion of ABS sequence control. • When a malfunction is detected. |
Operation
1. While the ABS sequence control is being performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve operation.2. A ...
Other materials:
Dtc p0617 starter relay "a" circuit high
1. MODEL WITHOUT PUSH BUTTON STARTDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Failure of engine to startCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIA ...
