Subaru Legacy BN/BS (2015-2019) Owners Manual: Unlocking

Subaru Legacy BN/BS (2015-2019) Owners Manual / Keys and doors / PIN Code Access (models with "keyless access with push-button start system") / Unlocking

Perform steps 1 to 5 described in "Registration".

NOTE

You cannot unlock by PIN Code Access in the following cases.

when the access key is within the operating ranges
when the ignition switch is in the "ACC" or "ON" position

If you make an operation error during the unlocking procedure, start over with the unlocking procedure after waiting for 5 seconds or longer.
To protect your vehicle from theft, a buzzer will sound if incorrect PIN codes are entered five times continuously. If this occurs, you cannot unlock the doors by PIN Code Access for 5 minutes.

Registering a PIN code

Preparation Turn off the ignition switch. Close all doors (including trunk/rear gate). Press and hold the " " button on the access key. Then all doors (including rear gate ...

Remote keyless entry system

CAUTION Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing. Do not take the remote transmitter ...

Other materials:

Dtc b1832 short in curtain airbag rh squib circuit (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in curtain airbag RH, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAUTION” ...