Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Transmission case / Adjustment

NOTE:

When replacing the transmission case with a new part, perform the following check and adjustment for the selection.

• Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT

• Select the transfer drive gear shim. Reduction Driven Gear > ADJUSTMENT

• Select the reduction drive gear shim. Reduction Drive Gear > ADJUSTMENT

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the control valve body. Control Valve Body > REMO ...

Installation

1. Clean the mating surface of transmission case and converter case.2. Select the reduction gear shim. Reduction Drive Gear > ADJUSTMENT3. Remove the transmission case, and install the selected reduc ...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Loosen the clamp (A) securing the air in ...