Subaru Legacy BN/BS (2015-2019) Service Manual: Air breather hose

Transfer clutch pressure test inspection

1. EXCEPT FOR OUTBACK MODEL1. Lift up the vehicle.2. Remove the rear exhaust pipe from center exhaust pipe.3. Remove the center exhaust cover.4. Set the transmission jack under the transmission.5. Rem ...

Removal

1. FRONT DIFFERENTIAL SIDE1. Remove the clip (A), and loosen the clamps (B) and (C).2. Remove the air intake boot assembly, and move it to the left side wheel apron.3. Remove the air breather hose.2. ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.1. Install the secondary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:5 N·m (0.5 kgf-m, 3.7 ft ...