Subaru Legacy BN/BS (2015-2019) Service Manual: Air intake duct

Installation

1. Install the air intake boot and connect the blow-by hose (D) to the air intake boot.2. Tighten the clamp (B) securing the throttle body to the air intake boot.3. Tighten the bolt (C) securing the a ...

Removal

Remove the clip which secures the air intake duct, and remove the air intake duct. ...

Other materials:

Inspection
1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 8Switch OFF1 M- or moreSwitch ONLess than 1 -2. Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.Term ...