Subaru Legacy BN/BS (2015-2019) Service Manual: Automatic transmission assembly

Installation

1. Install the oil cap.NOTE:Use new O-rings.2. Install the two air breather hoses.3. Install the air intake boot. Air Intake Boot > INSTALLATION4. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Remove the front tires.2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) w ...

Other materials:

Dtc b11f0 disposal process complete
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Disposal process of airbag control module is completed.CAUTION:Before performing diagnosis, refer to “CAUTION” in “General Description”. General Description > CAUTIONSTEPCHECKYESNO1.CHECK DTC. ...