Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Heater vent duct / Removal

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the instrument panel assembly. Instrument Panel Assembly > REMOVAL

3. Remove the screws and remove the duct - center vent (A) and the duct - side ventilation (B) on LH and RH sides.

Inspection

1. Check installation condition of duct. Connect the duct properly if defective.2. Check that no foreign matter is mixed in the duct. Remove the foreign matter if any. ...

Other materials:

Basic diagnostic procedure procedure
NOTE:When the sunload sensor check is performed indoors or in the shade, it could be diagnosed as sensor having an open circuit. Always perform the inspection in direct sunlight.STEPCHECKYESNO1.START INSPECTIONS.1) Prepare the tools. General Description > PREPARATION TOOL2) Perform the pre-inspecti ...