Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Check the auto-reverse mechanism. CAUTION: Do not place objects in the way to check the auto-reverse mechanism. 1. Open the lid assembly - sunroof. 2. Push the lid assembly - sunroof in the opening direction with a force of 110±10 N (11.2 kgf, 24.7 lbf±1.0 kgf, 2.2 lbf) during the auto-closing operation, and check whether the window auto-reverse mechanism functions. NOTE: If the auto function is cancelled, perform the initialize operation. Sunroof Control System > OPERATION |
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the overhead console. (Models without EyeSight) Spot Map Light > REMOVAL3. Remove the stereo camera cover assembly. (Models with ...
Installation
CAUTION:• When installing the motor assembly - sunroof, do not allow the cable assembly to move.• For installation of the stereo camera cover, refer to “INSTALLATION”, “S ...
Other materials:
Dtc p0018 crankshaft position - camshaft position correlation bank 2 sensor a
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCE ...
