Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Air breather hose / Installation

1. Install the oil cap.

NOTE:

Use new O-rings.

2. Install the two air breather hoses.

3. Install the air intake boot. Air Intake Boot > INSTALLATION

4. Connect the ground terminal to battery sensor. NOTE

5. Install the collector cover.

Inspection

• Check the hose for peeling, crack or clogging.• Check the oil cap is not cracked or clogged.• Check O-ring of oil cap is not damaged. ...

Automatic transmission assembly

...

Other materials:

Operation
1. INITIALIZE OPERATIONCAUTION:If the switch is released during initialization operation, perform the procedure over again.1. Turn the ignition switch to ON.2. Completely tilt open the lid assembly - sunroof.3. Release the switch once, and press and hold the tilt up switch or close switch again for ...