Subaru Legacy BN/BS (2015-2019) Service Manual: Battery sensor

Installation

1. BATTERY1. Install the battery and battery pan.2. Install the battery holder, and install the bolts to the battery box.NOTE:Check that the rod (b) of the battery holder is inserted into the hole (a) ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the battery holder.3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor. ...

Other materials:

Inspection
1. Measure the resistance between connector terminals.Preparation tool: Circuit testerTerminal No.Inspection conditionsStandard4 — 2AlwaysApprox. 0.44 -4 — 3Approx. 1.12 -4 — 1Approx. 2.92 -2. Replace the blower resistor if the inspection result is not within the standard value. ...