Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Check the battery sensor for deformation, cracks and any other damage. |
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the battery holder.3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor. ...
1. Install the battery sensor, and connect the connector (B) to the battery sensor.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb)2. Attach the clip (A) to the battery holder.3. Connect the grou ...
Other materials:
Dtc p0461 fuel level sensor "a" circuit range/performance
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK FOR ANY OTHER DTC ON DISPLAY.Is an ...