Subaru Legacy BN/BS (2015-2019) Service Manual: Check list for interview check

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Check list for interview check

Customer’s Name		Inspector’s Name
Date Vehicle Brought in	/ /	Registration No.
Odometer reading	km miles	V.I.N.
Date Problem Occurred	/ /	Registration Year	/ /
Weather	Fine Cloudy Rainy Snowy Others:
Temperature	°C (°F)
Road Condition	Flat road Uphill Downhill Gravel road Others:
Vehicle Operation	Starting Idling Driving Constant speed Accelerating Decelerating Turning Others:
Details of Problem
Airbag Warning Light Operation	Normal (After turning the ignition switch to ON, illuminates for 6 seconds then goes off.) Remains ON Remains OFF
Passengers airbag ON/OFF indicator operation	Normal (After turning the ignition switch to ON, illuminates for 6 seconds then goes off for 2 seconds; Lights ON (adult) or OFF (children/unoccupied).) Both remain ON Both remain OFF
DTC output	OK code DTC: (Code: )

Basic diagnostic procedure procedure

STEPCHECKYESNO1.CHECK WARNING LIGHT.Check whether the airbag warning light in the combination meter is lit.Does the airbag warning light illuminate- Basic Diagnostic Procedure > PROCEDUREPerform the d ...

Clear memory mode operation

After repairing the occupant detection system, clear the DTCs stored in the airbag control module and the occupant detection control module.1. AIRBAG SYSTEM1. On «Start» display, select «Diagnosis� ...

Other materials:

Installation
1. Install the starter to the transmission.NOTE:Tighten the starter and bracket (a) together using the upper bolt securing the starter.Tightening torque:50 N·m (5.1 kgf-m, 36.9 ft-lb)2. Connect the connector (A) to the starter, and install the terminal (B).Tightening torque:10 N·m (1.0 ...