Subaru Legacy BN/BS (2015-2019) Service Manual: Compressor

Installation

1. Install the blower resistor.2. Install the under cover assembly - passenger.3. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. H4 MODEL1. Perform compressor oil return operation. Compressor Oil > PROCEDURE2. Turn the A/C switch to OFF and stop the engine.3. Using the refrigerant recovery system, discharge refrigerant. Re ...

Other materials:

Starting engine
CAUTION Do not operate the starter motor continuously for more than 10 seconds. If the engine fails to start after operating the starter for 5 to 10 seconds, wait for 10 seconds or more before trying again. NOTE It may be difficult to start the engine when the batter ...