Subaru Legacy BN/BS (2015-2019) Service Manual: Connecting rod specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Connecting rod specification

Refer to “Cylinder Block” for removal and installation procedures of connecting rod.

Cylinder Block > REMOVAL Cylinder Block > INSTALLATION

Compression inspection

CAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself during measurement.NOTE:• Before checking the compression pressure, the compression condition of each cylinder ...

Crankshaft specification

Refer to “Cylinder Block” for removal and installation procedures of the crankshaft. Cylinder Block > REMOVAL Cylinder Block > INSTALLATION ...

Other materials:

Installation
1. Install the clutch pipe to the mass damper, clutch damper, master cylinder and pipe grommet.NOTE:Temporarily tighten the clutch pipe (D) to the clutch damper.Tightening torque:T: 15 N·m (1.5 kgf-m, 11.1 ft-lb)(A)Clutch pipe(B)Mass damper(C)Clutch pipe grommet(D)Clutch pipe2. Install the pe ...