Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Clutch system / Operating cylinder / Disassembly

1. Remove the boot and push rod.

2. Apply compressed air through clutch hose attachment hole.

NOTE:

Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.

3. Separate the piston and piston spring.

Inspection

1. Check that the operating cylinder is not damaged. Replace the operating cylinder if it is damaged.2. Check the brake fluid leakage on the operating cylinder or the boot for damage. Replace the oper ...

Release bearing and lever

...

Other materials:

Dtc b1907 short in front p/t lh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in rear harness, shorted to ground in front seat pretensioner LH, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAUTI ...