Subaru Legacy BN/BS (2015-2019) Service Manual: Operating cylinder

Installation

1. Install the master cylinder to the pedal assembly.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)(A)Master cylinder2. Install the clutch pipe to the master cylinder.Tightening torque:15 N&m ...

Removal

CAUTION:Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled.1. Disconnect the ground terminal from battery sensor. ...

Other materials:

Disassembly
1. Disconnect the clutch pipe from the master cylinder.2. Remove the clutch damper mounting nut from the pedal assembly, and disconnect the clutch pipe from the clamp.3. Remove the clutch switches.4. Remove the clip and pull out the clevis pin.(A)Clevis pin(B)Clip5. Disconnect the connector from the ...