Subaru Legacy Service Manual: Disassembly

Subaru Legacy Service Manual / Speed control systems(h4do) / Accelerator pedal / Disassembly

NOTE:

The accelerator pedal cannot be disassembled.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Disconnect the connector (A).3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly. ...

Installation

1. Install the accelerator pedal assembly, and connect the connector.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Assembly
1. FRONT1. Insert the rubber assembly - windshield wiper onto the blade - windshield wiper so that the stopper is in the position shown in the figure.2. Make sure the rubber assembly - windshield wiper is securely fastened to the pull stopper (A).2. REAR1. Insert the rubber assembly - rear wiper int ...