Subaru Legacy BN/BS (2015-2019) Service Manual: Drain filter

Installation

1. Install the leak check valve assembly to the canister.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the drain tube (A).CAUTION:• Check that there is no damage or dust on the ...

Removal

1. Remove the rear differential. (Sedan model) Rear Differential (VA-type) > REMOVAL2. Disconnect the drain tube (A) from the drain filter.NOTE:Disconnect the quick connector as shown in the figure.( ...

Other materials:

Installation
CAUTION:Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).1. Install the resistor assembly - daytime running light.CAUTION:Be careful not to allow the harness to interfere wi ...