Subaru Legacy BN/BS (2015-2019) Service Manual: Drive plate

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Drive plate

Removal
Inspection
Installation

Assembly

1. Install the plug to drive pinion retainer.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Using the ST, install the oil seal ...

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT STOPPER3. Remove ...

Other materials:

Removal
1. FRONT CUSHION RUBBER AND ENGINE MOUNTING BRACKET1. Fully open the front hood. NOTE2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the air intake duct. Air Intake Duct > REMOVAL4. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.5. Remove ...