Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1770 occupant detection sensor temperature too high

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b1770 occupant detection sensor temperature too high

DTC DETECTING CONDITION:

Occupant detection control module is faulty.

When this DTC is displayed, the occupant detection control module is faulty.

Replace the occupant detection system (passenger’s & frame assembly). Front Seat > DISASSEMBLY

Dtc b1772 occupant detection sensor temperature too low

DTC DETECTING CONDITION:Occupant detection control module is faulty.When this DTC is displayed, the occupant detection control module is faulty.Replace the occupant detection system (passenger’s ...

Dtc b176f occupant detection sensor input voltage low

Other materials:

Assembly
1. Install the tie-rod into rack.Tightening torque:90 N·m (9.2 kgf-m, 66.4 ft-lb)NOTE:Check the mating face of rack and tie-rod for foreign matter such as dust etc.2. Apply a coat of grease to the tie-rod groove, and then install the boot - steering gearbox to the housing.CAUTION:Assemble the ...