Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1772 occupant detection sensor temperature too low

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b1772 occupant detection sensor temperature too low

DTC DETECTING CONDITION:

Occupant detection control module is faulty.

When this DTC is displayed, the occupant detection control module is faulty.

Replace the occupant detection system (passenger’s & frame assembly). Front Seat > DISASSEMBLY

Dtc b1773 belt tension sensor circuit open

DTC DETECTING CONDITION:• Passenger’s seat belt tension sensor is faulty.• Airbag main harness circuit is open or shorted.• Occupant detection control module is faulty.CAUTION: ...

Dtc b1770 occupant detection sensor temperature too high

DTC DETECTING CONDITION:Occupant detection control module is faulty.When this DTC is displayed, the occupant detection control module is faulty.Replace the occupant detection system (passenger’s ...

Other materials:

Installation
1. Route the oil level switch harness as shown in the figure.(A)Route the oil level switch harness through inside of the oil pan upper bolt.2. Attach the oil level switch to the oil pan upper.NOTE:• Use new O-rings.• Apply a coat of engine oil to the O-rings.Tightening torque:6.4 N&middo ...