Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc c2512 torque sensor sub

Subaru Legacy BN/BS (2015-2019) Service Manual / Power assisted system (power steering) (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc c2512 torque sensor sub

DTC DETECTING CONDITION:

When torque sensor sub output voltage failure is detected after the ignition switch is ON.

NOTE:

Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2511 TORQUE SENSOR MAIN

Dtc c2513 torque sensor much tolerance

DTC DETECTING CONDITION:When torque sensor main/sub output voltage failure is detected after the ignition switch is ON.NOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure ...

Dtc c2511 torque sensor main

DTC DETECTING CONDITION:When torque sensor main output voltage failure is detected after the ignition switch is ON.TROUBLE SYMPTOM:• The steering wheel operation feels heavy.• STEERING war ...

Other materials:

Dtc c1985 forbidden state of dynamic actuator operation
DTC DETECTING CONDITION:This malfunction is stored if dynamic parking through the electronic parking brake actuator does not operate.TROUBLE SYMPTOM:Parking brake system does not operate.STEPCHECKYESNO1.CHECK DETECTION OF OTHER DTCS FOR VDC. Read Diagnostic Trouble Code (DTC)Is any other DTC display ...