Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u1433 invalid data received from eyesight

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u1433 invalid data received from eyesight

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

• Detect malfunction of CAN communication.

• Judge as NG when data received from the stereo camera is not normal.

2. EXECUTION CONDITION

Secondary Parameters	Execution condition
Turbine shaft speed	> 0 rpm
or
D range switch	ON

3. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria	Threshold Value
CAN data from stereo camera	Freeze

Time Needed for Diagnosis: 2 seconds

Diagnostic procedure with diagnostic trouble code (dtc)

...

Dtc p0717 input/turbine shaft speed sensor "a" circuit no signal

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Standing start problems• Shock occurs when engaging the lockup clutch.• Shock occurs when selecting shift po ...

Other materials:

Inspection
1. Measure the resistance between connector terminals.Preparation tool:Circuit tester• Lighting switchTerminal No.Inspection conditionsStandard18 — 1219 — 1220 — 12Switch OFF1 M- or more19 — 12Switch AUTOLess than 1 -18 — 12Switch 1 (PARKING)Less than 1 -18 — 1220 — 12Switch 2 (H ...