Subaru Legacy BN/BS (2015-2019) Service Manual: Electronic throttle control relay

Installation

The crankshaft position sensor plate is tightened together with the drive plate or flywheel; therefore, refer to “Drive Plate” or “Flywheel” for installation procedure. Drive ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the electronic throttle control relay from the main fuse box. ...

Other materials:

Adjustment
1. Remove the spring retainers and reduction drive gear shims.2. Install the transmission case, and secure it with four or five bolts.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)3. Measure depth “A” from the ST upper face to the reduction drive gear end face.ST 499575400GAU ...