Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h4do) / Electronic throttle control relay / Installation

1. Install the electronic throttle control relay to the main fuse box.

2. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the electronic throttle control relay has no deformation, cracks or other damages.2. Measure the resistance between electronic throttle control relay terminals.Terminal No.Standard1 and ...

Engine control module (ecm)

...

Other materials:

Installation
CAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur.1. Install the garnish assembly - rear gate.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)2. Install the cover - rear gate.Tightening torque:1.5 N&midd ...