Subaru Legacy BN/BS (2015-2019) Service Manual: Engine assembly

Disassembly

1. Set the cylinder head on ST.ST 18250AA010CYLINDER HEAD TABLE2. Remove the valve lifter.3. Compress the valve spring using ST, and remove the valve spring retainer key, each valve and valve sprin ...

Removal

1. Fully open the front hood. NOTE2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positi ...

Other materials:

Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or more1 — 2Apply battery voltage between terminals 4 and 3.Less than 1 ...