Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h6do) / Engine assembly / Inspection

1. Check that the pipes, hoses, connectors and clips are securely connected.

2. Check the engine coolant is at specified level.

3. Check CVTF is at the specified level.

4. Start the engine and check for exhaust gas, engine coolant, leaks of fuel, etc. Also check for noise and vibrations.

Removal

1. Fully open the front hood. NOTE2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positi ...

Installation

1. Position the engine in engine compartment and align it with transmission.NOTE:Be careful not to damage adjacent parts or body panels with crank pulley, oil level gauge, etc.2. Install the bolts whi ...

Other materials:

Checking the fluid level
WARNING Never let brake fluid contact your eyes because brake fluid can be harmful to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety, when performing this work, wearing eye protection is advisab ...