Subaru Legacy BN/BS (2015-2019) Service Manual: General description

Installation

CAUTION:Do not tighten excessively, or oil may leak.1. Clean the oil filter installation surface of the oil cooler.2. Obtain a new oil filter and apply a thin coat of engine oil to the seal rubber.3. ...

Specification

Lubrication methodForced lubricationOil pumpPump typeTrochoid typeNumber of teethInner rotor7Outer rotor8Outer rotor diameter - Thicknessmm (in)76 - 30.2 (2.99 - 1.19)Performance(Oil temperature 80&#x ...

Other materials:

Installation
1. Clean the crankshaft thread using compressed air.2. Install the crank pulley.3. Apply engine oil to the crank pulley bolt seat and thread.4. Use the ST to lock the crank pulley, and tighten the crank pulley bolt.NOTE:After tightening, if engine oil is spilt onto the crank pulley bolt or the crank ...