Subaru Legacy BN/BS (2015-2019) Owners Manual: Initial screen

Subaru Legacy BN/BS (2015-2019) Owners Manual / Audio / Audio set / Basic information before use / Initial screen

When the ignition switch is in the "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating.

Initial screen

When using the SUBARU STARLINK function (if equipped), the display screen may be different from the screen above.
After a few seconds, the caution screen will be displayed.
After about 5 seconds, the caution screen automatically switches to the next screen.

Initial screen

Entering letters and numbers/list screen operation

Entering letters and numbers When entering the Bluetooth device name or PIN-code, or the phone number, letters and numbers can be entered via the screen. Enter letters (example: In-Car-Device ...

Connecting and disconnecting a USB memory/portable device

The USB port and the AUX jack are located as shown in the following illustration. NOTE This unit does not support commercially available USB hubs. Turn on the power of the de ...

Other materials:

Dtc p0604 internal control module random access memory (ram) error
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:TCM RAM malfunctionSTEPCHECKYESNO1.CHECK DTC.1) Perform the Clear Memory Mode using the Subaru Select Monitor. Clear Memory Mode2) Read the DTC.Is DTC P0604 displayed-Replace the TCM. Transmission ...