Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Brake hose / Inspection

Check the hose for crack, interference with other parts, damage, and fluid leakage on connecting sections. If any faulty is found, repair or replace the relevant part.

Removal

1. FRONT BRAKE HOSE1. Disconnect the brake hose (a) and the brake pipe (b).Tools used:Flare nut wrench2. Remove the clamp, strut mounting bolt and union bolt, and remove the front brake hose.2. REAR B ...

Installation

1. FRONT BRAKE HOSE1. Secure the brake hose to the brake hose mount part of strut COMPL.Tightening torque:Brake hose: 33 N·m (3.4 kgf-m, 24.3 ft-lb)2. Connect the brake hose to the caliper body ...

Other materials:

Installation
CAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION1. When replacing the actuator with a new part, apply a thin coat of grease evenly to the side face (a) of lever pin ...