Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Oil pump / Inspection

Check the following items.

• Check the oil pump for damage and wear.

• Rotate the oil pump by hand, and check that it rotates smoothly.

1. Measure the secondary pressure. Secondary Pressure (Line Pressure) Test > INSPECTION

2. Remove the oil pan and oil strainer. Oil Pan and Strainer > REMOVAL

3. Check oil strainer for clogging.

When oil strainer has no clogging, replace the oil pump.

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Remove the oil pump chain cover. Oil Pum ...

Installation

1. Install the O-rings.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. Install the plate and the oil pump.NOTE:Apply CVTF to the bolt.Tightening torque:8.5 N·m (0.9 kgf-m, 6.3 ...

Other materials:

Dtc p0459 evap system (cpc) purge control valve "a" circuit high
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• En ...