Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Front disc brake assembly / Inspection

1. Check the piston sliding part of caliper body and the piston for uneven wear, damage or rust.

2. Check the rubber parts for damage or deterioration.

3. If faulty is found in the inspection, replace the relevant part.

Installation

1. 16-INCH TYPENOTE:Before installation, remove mud and foreign matter from the caliper body assembly and support - front disc brake.1. Check each part. Front Disc Brake Assembly > INSPECTION2. Apply ...

Disassembly

CAUTION:Be careful not to allow foreign matter to enter the brake hose connector.1. Remove mud and foreign matter from the caliper body assembly.2. Remove the piston - disc brake.(1) Place a wooden bl ...

Other materials:

Time lag test inspection
NOTE:When the select lever is shifted while the engine is idling, there will be a certain time elapse or lag before shock is felt. This symptom helps to check the condition of forward clutch and reverse brake.• Perform the test at normal operation CVTF temperature of 60 — 80°C (140 � ...