Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Clutch system / Clutch pipe and hose / Inspection

Check the clutch pipe, tank hose and clutch hose for breaks and damage. Check the joint for brake fluid leakage. If crack, breakage or damage is found, repair or replace the faulty clutch pipe, tank hose or clutch hose.

Removal

CAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION1. Turn the igni ...

Installation

1. Install the clutch pipe to the mass damper, clutch damper, master cylinder and pipe grommet.NOTE:Temporarily tighten the clutch pipe (D) to the clutch damper.Tightening torque:T: 15 N·m (1.5 ...

Other materials:

Dtc p2757 torque converter clutch pressure control solenoid control circuit performance/stuck off
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:No lock-up occurs.1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK DTC.Read the DTC using Subaru Select Monitor.Besides DTC P2757, is any ...