Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Clutch system / Master cylinder / Inspection

If any damage, deformation, wear, swelling, rust or other faults are found on the master cylinder assembly, reservoir tank, clutch damper, clutch pipe and clutch hose, replace the faulty part.

Removal

CAUTION:• Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled.• Before ha ...

Installation

1. Install the master cylinder to the pedal assembly.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)(A)Master cylinder2. Install the clutch pipe to the master cylinder.Tightening torque:15 N&m ...

Other materials:

Inspection
1. CHECK SWITCH UNITMeasure the resistance between harness connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON (when measured with the switch held down)Less than 1 -2. CHECK X MODE SYSTEMDIAGNOSIS:It does not swi ...