Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Reduction driven gear / Inspection

• Check the ball bearing for smooth rotation.

• Check the ball bearing for excessive looseness.

• Make sure each gear is not broken or damaged.

Installation

1. Install the reduction driven gear assembly and spacer oil.Tightening torque:17 N·m (1.7 kgf-m, 12.5 ft-lb)2. Select the transfer drive gear shim. Reduction Drive Gear > ADJUSTMENT3. Install ...

Disassembly

1. Flatten the tab of the lock nut.2. Using the ST, counter the rotation of the reduction driven gear assembly, and remove the lock nut.ST1 18355AA000PULLEY WRENCHST2 18334AA000PIN SETST3 499 ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.1. Install the turbine speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:7 N·m (0.7 kgf-m, 5.2 ft-lb) ...