Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transmission control device / Inspection

Make sure that the manual lever and detent spring are not worn or otherwise damaged.

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the oil pan and control valve body. Control Valve Body > REMOVAL3. Remove the inhibitor switc ...

Installation

1. Install the detent spring to the transmission case.Tightening torque:7 N·m (0.7 kgf-m, 5.2 ft-lb)2. Install the manual plate, parking rod, range select lever and bolt.Tightening torque:7 N&m ...

Other materials:

Dtc p2404 evap system leak detection pump sense circuit range/performance
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...