Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Check the removed parts for damage, wear, corrosion etc. Repair or replace if defective. • DOJ (Double Offset Joint): Check for seizure, corrosion, damage, wear and excessive play. • EBJ (High-Efficiency Compact Ball Fixed Joint): Check for seizure, corrosion, damage, wear and excessive play. • BJ (Ball Fixed Joint): Check for seizure, corrosion, damage and excessive play. • Shaft: Check for excessive bending, twisting, damage and wear. • Boot: Check for wear, warping, breakage and scratches. • Grease: Check for discoloration and fluidity. |
Installation
1. Replace the rear differential side oil seal. Rear Differential Side Oil Seal > REPLACEMENTNOTE:After pulling out the drive shaft assembly, be sure to replace with a new oil seal.2. Insert the driv ...
Disassembly
1. Using a flat tip screwdriver or pliers, loosen the boot band on the large end of DOJ boot.CAUTION:Be careful not to damage the boot.2. Remove the boot band on the small end of DOJ boot in the same ...
Other materials:
Adjustment
CAUTION:• CVTF level changes along with CVTF temperature. When inspecting CVTF level, observe the specified CVTF temperature.• Always use specified CVTF. Using other fluid will cause malfunction.1. Idle the engine to raise CVTF temperature to 35 — 45°C (95 — 113°F) on S ...
